M + A Hog Heaven Black/Yellow Bordered Anti-Fatigue Mat

Hog Heaven is a popular anti-fatigue mat. It’s ability to perform in a variety of indoor environments (from sensitive to harsh) make it a “go-to” solution for indoor commercial and industrial settings where slag, grease and oil, or chemicals are present. ¶¶Hog Heaven mats can be cleaned by scrubbing with a deck brush (when needed), using detergent with a neutral pH, and rinsing with a hose or pressure washer. Mats should be laid flat or hung to dry. ¶¶· Comfortable – High-density nitrile-blended cushion helps eliminate pressure to the lower back and legs, providing superior comfort¶· Safe – Certified high-traction by the National Floor Safety Institute (NFSI); sloped edges provide a safe transition from floor to mat¶· Durable – Nitrile-blended cushion provides years of useful service life; cushion is molded, not glued, to the nitrile rubber surface so it will not separate; edges will not crack or curl¶· Versatile – Welding safe; ESD rating of electrically conductive; chemical resistant; surface is grease/oil proof and cushion is grease/oil resistant¶¶Custom sizes are available in widths of 2′, 3′, 4′, and 4.8′ and lengths up to 100′. Please note that mats over 60′ will have up to 2 seams. Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.¶¶STANDARDS & TESTING¶Durometer: 56 Compression Deflection: 47.8% at 20 psi, 61.6% at 40 psi¶Certified high-traction by the National Floor Safety Institute (NFSI)¶Passes flammability standard DOC-FF1-70¶ASTM C1028-96 static coefficient of friction: Dry 0.87 Wet 0.85¶ESD rating of electrically conductive: Surface to surface at 50% relative humidity 2.6 x 10^5 ohms, surface to surface at 12% relative humidity 3.0 x 10^5 ohms¶Meets requirements for ASTM/ESD S20.20 and ASTM/ESD S7.1¶Melt point over 500 degrees F; tested at temperatures up to 1800 degrees F for welding/slag resistance